Under Floor Heating Systems

Heating is an important part of building setup and more so for one’s home. Even then, the reason a home heating system is installed varies from a luxury in areas with moderate weather conditions, to a virtual must have in areas subject to extreme cold. There are different methods through which you can heat up the home. One of the most effective is the use of a floor heating wire. You can use floor heating wire in almost any room within the home.  The installation process, even though varying from one manufacturer to the other, is often structured in a way that makes it either possible for one to do the installation themselves or require minimal assistance from a technical expert.

Before you start the installation of the floor heating wire, it is important that you first decide on which type of floor heating installation you prefer and the amount of wattage you require. For instance, when it comes to the type of installation, you could opt to go for a setup where the floor heating wire comes already in a mat format, making installation very easy and quick. Alternatively, you can use the floor heating wire as a “loose wire” and by using clip strips you will affix the cable across the floor. This option is more labor intensive yet less costly.

If you do opt for floor heating wire and decide on the type of wattage you need, then all you need to do is take the dimensions of the room(s) and then buy the cabling and clip strips. As you start to lay out the cabling, you must ensure the spacing between wire loops is constant and based on the cable length and the intended heated area size.  This not only makes sure that the heat is evenly distributed across the floor, but that also the length of the heating cable itself is used efficiently. After you are done with the cabling, you can use a leveling compound before placing the carpet, tiling or laminated floor on top.

Other than flexibility, floor heating wire has several advantages one of which is that it uses the normal electricity supply so all you need to do is plug it in. Installing the clip strips only requires a hammer, nails and a ruler or tape measure. Since most floor heating wire installations are thermostat controlled, you can set different zones that each varying temperature levels and working time frames.

When this product was introduced on the market, the initial reaction from the consumers was disbelief and outright doubt.  Certainly, most people who are not very familiar with the possibilities that science can offer these days think that there is no way a floor mat would be able to warm up an entire living space.

One of the things that you should know about the EasyMat is that it is not just an ordinary floor mat.  It is a high end North American heating cable  system that is  configured in mats that are laid out on the floor of the area.

Where can it be used?

EasyMat can be used in all areas of the house.  Among other things, it can provide warmth around the clock to many areas of your home such as your kitchens, living rooms, bedrooms, dens, home office area, basement, attics, bathrooms, and foyers.

Installation and Configuration

You might be wondering how this heating system actually works because installing wires under the floor would certainly require a certain level of alteration.  One major advantage of this system is that it will not affect the current configuration of your floors.   In fact, you will not even notice any changes aside from the warmth that you will experience once the cables have been installed.

Preparing for Installation, tools, and Materials

When you decide that this is actually the heating system for you, there are minimal preparations that need to be done.  For starters, each floor type is different and the dimensions of each one should be in congruence with the cables to be installed.   As for the current and voltage, there is no need for any particular adjustment because the EasyMat requires only what is already used in households.  If you are about to remodel your home or if you are in the middle of building your dream house, this  heating system is something that you should certainly consider.

Everyone wants to have an excellent heating system in his or her homes.  EasyMat would be a great addition to your place and a wise investment considering that you will have an efficient heating system that is both effective and economical.

While ice-fishing and ice skating can be some of the most thrilling activities during the wintertime, ice can also cause headaches for people. Icy sidewalks and icy roads are not only a nuisance, but can become major hazards as well. Homeowners also have to deal with house roofs that can ice up. The good news is that you can do something about it!

The Problem

After ice forms on the roof of your house, this can result in the formation of icicles over your gutter. Sure, these icicles can be attractive-and especially if the sunlight glistens off them at the right angle. But a problem arises when water behind the “ice dam” starts building up. The result is that water stars leaking into your home. The leaking can result in structural damage to your home, as well as damage to the contents of your home. If you own a business, you should also be concerned about ice and snow falling off the roof, onto pedestrians walking by. You definitely want to avoid any potential liabilities that the situation could cause. That’s why it’s crucial that you deal with the problem of accumulating snow and ice on a building’s rooftop.

The Solution

The good news is that you can install a de-icer system for your roof.  One type of system uses sensors to melt ice that forms atop the gutter. A drainage path then guides the water into the gutter, where it descends the downspout. While the essence of this system is basic, it’s extremely effective in preventing ice from damaging your house structure.

The Benefits

A de-icing system for your roof can provide you with several benefits:

• Reliability: A system is only effective if it works whenever you need it to.
• Flexibility: You can use the best de-icing systems for a roof of any shape.
• Efficiency: The best systems only function when you need them to.
• Durability: If you have problems with ice forming along your roof, then you definitely want a system that will last and last. Otherwise, you could end up wasting money replacing your system every few years.
• Easy installation: Few of us have enough time to deal with DIY projects that require a lot of time and effort.
• Cost-effectiveness: Since sensors are used to activate the system, you won’t waste energy with a system that runs constantly.

While snow and ice can make wintertime magical, that’s not the case when dealing with ice and snow buildup on your roof. Consider a roof de-icing system that can keep your roof and everything underneath it safe!

Our floor heating system will turn those cold rooms into warm and cozy spaces!

Turn your cold rooms into warm and comfy areas of delight. These floor heating systems were designed for easy self-installation. A simple three step process and you will be living in bliss. No need for complicated process, just in three steps you can have your floor installed….

Supply radiant heat to any room in your home with the EasyMat under-floor heating system. The heating element is only 1/8” in diameter, which is intended to be installed right under your floor without altering the level, and is appropriate for any room type and layout.

You can use it as the prime or a secondary heat source for:
Kitchens
Bathrooms
Basements
The cold room over the garage
Entrance
Mud room
Conservatory/ sun room

And anywhere else you would need to feel warmer.

EasyMat will require the ordinary current that is already in your home.

It is versatile and is suitable for both remodeling and new construction.

Developed and designed to be a simple, fast and user- friendly. The heating cables are formed into mats that have glue strips, which attach quickly in any layout.

Was developed such that you will not need tools or any additional materials to install.

EasyMat will not change the level of your floor. It is flexible and can be installed around any obstacle and can be used to heat any area as a primary or secondary source of heat.  Floor heating system is operated by a programmable thermostat, which allows you to control the setting of desired heat comfort.

Simple to follow instructions complete with detailed information so your house can have special rooms with super-warm floors in no time with DIY Underfloor Heating!